mikuni tm 36 problem
Hi ,i placed a bid on a mikuni tm36 carb.But i just compared the carb with a picture of a tm36 and found out it is missing a black cap on top.
Is this a problem for the functioning of the carb?
her are some pictures of the carb i placed a bid on
My Webpage
My Webpage
and here the picture i compared it with
My Webpage
I hope to here soon if i made a big mistake by bidding on this carb,i think i did,so let me know thanks
Is this a problem for the functioning of the carb?
her are some pictures of the carb i placed a bid on
My Webpage
My Webpage
and here the picture i compared it with
My Webpage
I hope to here soon if i made a big mistake by bidding on this carb,i think i did,so let me know thanks
- ThomasD
- Ex-Admin
- Beiträge: 4703
- Registriert: 16.05.2004 13:22
- Wohnort: Bonn am schönen Rhein
- Danksagung erhalten: 3 Mal
- Kontaktdaten:
This link does not workDr350super @ Donnerstag, 06.April 2006, 12:35 Uhr hat geschrieben: and here the picture i compared it with
My Webpage

But for shure could you please give us the complete link of your auction?
Grüsse,
Tom
Tom
yes correct.it is nr 7 (Schieberdeckel)
and i compared it with this picture http://www.student.uni-oldenburg.de/iwe ... rechts.jpg
I see more differences and the carb i am mentioning looks very old,maybe there is a schieberdeckel on top but a old type?????
and i compared it with this picture http://www.student.uni-oldenburg.de/iwe ... rechts.jpg
I see more differences and the carb i am mentioning looks very old,maybe there is a schieberdeckel on top but a old type?????
-
- Advanced Member
- Beiträge: 5761
- Registriert: 18.05.2004 08:14
- Wohnort: 98590
- Kontaktdaten:

nein das ist schon der Richtige, es ist nur eine älteres Modell. (siehe auch die Verkleidung der Stößelstange für die Beschleunigerpumpe und den Stutzen auf der Motorseite) Der Deckel ist da schon drauf, er ist halt nicht schwarz beschichtet. (sondern in rosa

Außerdem ist der Vergaser auf deinem Bild mehr von untern fotografiert.
Wir sollten viel mehr nachdenken....
und das vorher.
und das vorher.
-
- Advanced Member
- Beiträge: 5761
- Registriert: 18.05.2004 08:14
- Wohnort: 98590
- Kontaktdaten:
...gebrauchte TM36 kosten so zwischen 100,- und 200,- Euro. Doch du musst selber wissen was er dir Wert ist.Dr350super @ Donnerstag, 06.April 2006, 13:45 Uhr hat geschrieben: what is this carb worth.How much would you pay for this carb?
Der auf deinem Bild sieht ja schon etwas älter aus, aber das hat ja nichts zu sagen. Wichtig ist das alle Gewinde, der Gasschieber und seine Führung noch okay sind. Und das ist halt bei ebay so eine Sache.
Gebe uns doch mal einen Link zur Auktion.
So um die 250,- Euro.and how much does a new one cost?
Und ich kann nicht englisch, darum schreibe ich deutsch.Thank Mattias ich verstehe deutsch aber schlecht,thats why i write in english.

Wo wohnst du eigentlich?
Wir sollten viel mehr nachdenken....
und das vorher.
und das vorher.
this is the link
http://cgi.ebay.com/ebaymotors/ws/eBayI ... %3AIT&rd=1
ich wohne in holland
somebody has outbid me,i think i am going to buy a new one.And i don't recomend this carb ,it looks old and dirty.
http://cgi.ebay.com/ebaymotors/ws/eBayI ... %3AIT&rd=1
ich wohne in holland
somebody has outbid me,i think i am going to buy a new one.And i don't recomend this carb ,it looks old and dirty.
-
- Advanced Member
- Beiträge: 5761
- Registriert: 18.05.2004 08:14
- Wohnort: 98590
- Kontaktdaten:
Wer ist online?
Mitglieder in diesem Forum: Amazon [Bot] und 5 Gäste